NCS Expert coding factory setting for bmw ECU

It’s an instruction on how to do factory setting coding for bmw ECUs, with ICOM A2 emulator running with NCS Expert .

Open NCS, choose Expertmode profile

If you don’t have Expertmode profile, load the profile you are always using then click File->Edit profile->ESW/PSW and uncheck the option in the red box->click OK->click Profile info->check the Profile name to any name you prefer->click OK->click Ok to choose the profile editor->click File->save profile as->give it any name you want, and you have a profilefor loading factory setting to any ECU in the car.

ncs-expert-factory-setup-1

Press F1->F3 and choose your car chassis from the list->press OK->press F6

Press F4->choose the ECU you would like to code with the factory default options of your car->press OK

ncs-expert-factory-setup-2

Press F2->choose “SG_CODIEREN”->press OK

Press F3 to start coding the ECU with the factory setting according to your VO

ncs-expert-factory-setup-3

Mission accomplished.

 

 

Copy Protected by Chetan's WP-Copyprotect.