2013 Ford Ranger key programming with OBDSTAR X300 PRO3 Key Master

This is a guide for you to program 2013 Ford Ranger remote transponder using OBDSTAR X300 PRO3 Key Master. (Add key chip TP33 6E) Hope it helps! Check below:

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-1

(This 2013 Ford Ranger has only one valet key and want to add a master key with remote. First you should generate the new key with KD900 key maker.)

Below are operating steps different from regular procedure, but it works:

  1. Choose “Immobilizer”→ “Mazda” → “Mazda V30.27” → “BT50” → “2012-”.

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-2

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-3

  1. Choose “Program keys” function.

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-4

If all keys lost, it needs at least 2 keys to complete key programming. Press the ENT button to confirm.

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-5

  1. Insert the new key to be programmed, turn ignition on. The security light will blink. Press the ENT button to go on.

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-6

Now current key number is 2.

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-7

OBDSTAR Key Master add new key successfully! The key number turns to 3 and the security light go off.

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-8

New key start car working!

obdstar-x300-pro3-program-ford-ranger-key-chip-6e-9

 

Copy Protected by Chetan's WP-Copyprotect.