SKP900 read pin code & program remote key for Dodge Ram 2500

This is a guide show you SKP900 key programmer read pin code easily and program remote key for a 2012 Dodge Ram 2500. It’s easy to do even for beginners!

SKP900 read pin code & program remote key for Dodge Ram 2500 (steps):

Connect SuperOBD SKP-900 with car via OBD connector. Power up SKP-900, choose “IMMOBILIZER” then select “DODGE”.

skp900-read-pin-code-program-remote-dodge-ram-2500-1

Choose “IMMOBILIZER 2”

skp900-read-pin-code-program-remote-dodge-ram-2500-2

Loading

Choose “IMMOBILIZER SYSTEM”

Insert the key you want to program, turn ignition on

The immobilizer indicator starts blink

skp900-read-pin-code-program-remote-dodge-ram-2500-3

Press YES button to continue

skp900-read-pin-code-program-remote-dodge-ram-2500-4

First choose “PINCODE READ”

skp900-read-pin-code-program-remote-dodge-ram-2500-5

SKP900 immediately read out pin code for Dodge Ram 2500 as 7944!

skp900-read-pin-code-program-remote-dodge-ram-2500-6

Back to choose “ADD KEY”, enter the pin code 7944 and confirm that

skp900-read-pin-code-program-remote-dodge-ram-2500-7

ADAPT COMPLETE that means SKP900 successfully program remote key for Dodge Ram 2500!

skp900-read-pin-code-program-remote-dodge-ram-2500-8

The immobilizer indicator is off

skp900-read-pin-code-program-remote-dodge-ram-2500-9

And the new remote key is working!

skp900-read-pin-code-program-remote-dodge-ram-2500-10

 

 

Copy Protected by Chetan's WP-Copyprotect.